RETANOL XTREME SCREED - EXTREMELY HIGH EARLY AND FINAL STRENGTH - 72 HOUR DRYING TIME

Harris Floor Screeding Limited are approved installers of RETANOL XTREME SCREEDS. 

 

Key performance advantages:

• Guaranteed drying times: from 48 hrs for tiles and 72 hrs for all other floor coverings
• Foot traffic after 24hrs
• Approximately 80 –90 % of final strength within first 3–4 days. (Obtainable minimum strengths of CT-C40-F6 up to CT-C60-F8 depending on aggregates and amount of cement in accordance with DIN 1045-2)
• Underfloor heating can be run after 24 hrs (As per PCT Guidelines)
• Early compressive and flexural strength
• Ideal for underfloor heating with improved thermal conductivity
• Extended working life with short drying time
• Insensitive to moisture, therefore suitable for permanently wet areas
• For internal and external use
• Underfloor heating pipes require a minimum of 30 mm coverage over the pipe (As per BS 8204)
• Bonded screeds from 25 mm. In special cases, and subject to PCT site inspection and assessment, 15 mm depth (with ZE bonding agent) is possible with 0–4 mm Aggregates
• Unbonded and floating screeds from 35 mm
• PCT RETANOL® XTREME is a TUV certified screed product recognised under EU standards as a construction product with no negative impact on human health when handled or added into a floor screed installation

 

Download
RETANOL XTREME Data Sheet
PCT_product_brochure_Xtreme_6s_EN.pdf
Adobe Acrobat Document 2.7 MB